Browse Articles
Discover research articles across all indexed journals
Sliding-driven symmetry breaking induced ferroelectric polarization and phonon property modulation in a <b> <i>β</i> </b>-GaSe bilayer
Introducing ferroelectricity through symmetry breaking induces profound changes in the physical properties of a material. This study comprehensively tracks the ferroelectric polarization and phonon property changes resulting from interlayer sliding in a β-GaSe bilayer. The results indicate that sliding the upper layer of the bilayer induces charge transfer, causing polarization accompanied by periodic changes and reversal in non-polarized β-GaSe. Simultaneously, low-frequency optical phonons in polarized structures soften significantly, exhibiting a minimum or rapid decrease accompanied by the maximum value of in-plane polarization. Additionally, the sliding symmetry breaking has complex effects on phonon transport, causing intriguing changes in transport characteristics due to variations in group velocity and linewidth, which are closely related to ferroelectric polarization. This study reveals not only the polarization achieved in the β-GaSe bilayer through sliding-induced symmetry breaking but also its complex effects on phonons and profound physical changes, enriching our understanding of the associated condensed matter physics.
The centromere as a tag of self-DNA
ALKBH1 knockdown promotes the growth, migration and invasion of HTR-8/SVneo cells through regulating the m5C modification PSMD14
Abstract Preeclampsia (PE) is a pregnancy disease characterized by insufficient invasion and growth of trophoblast cells. adeno-associated virus encoding alkB homolog 1 (ALKBH1) is a demethylase in 5-methylcytosine (m5C) methylation modification. This study was performed to explore the role of ALKBH1 in hypoxia treated human extravasated trophoblast cells. Hypoxia treated human extravasated trophoblast cells (HTR-8/SVneo) was used to simulate the occurrence of PE in vitro. The cells phenotype was detected by CCK-8 and Transwell assays. The m5c levels and m5C levels of PSMD14 were analyzed by m5C dot blot and M5C Me-RIP assays. Then, the interaction between ALKBH1 and PSMD14 were confirmed by RIP and dual-luciferase reporter assays. ALKBH1 was up-regulated in hypoxia treated HTR-8/SVneo cells. Additionally, ALKBH1 knockdown increased the m5C contents, cell viability, migration and invasion abilities of hypoxia treated HTR-8/SVneo cells. Furthermore, ALKBH1 knockdown increased the m5C and mRNA levels, and mRNA stability of PSMD14. RIP and dual-luciferase reporter assays demonstrated that ALKBH1 interacted with PSMD14. Besides, PSMD14 knockdown reversed the effects of ALKBH1 silencing on cell viability, migration and invasion abilities of hypoxia treated HTR-8/SVneo cells. ALKBH1 mediated m5C levels were decreased in the hypoxia treated HTR-8/SVneo cells, which further decreased the cell viability, migration and invasion abilities through targeting the PSMD14 levels.
Atomic Layer Deposition Stabilizes Nanocrystals, Enabling Reliably High‐Performance Quantum Dot LEDs
AbstractQuantum dot light‐emitting diodes (QD‐LEDs) with stable high efficiencies are crucial for next‐generation displays. However, uncontrollable aging, where efficiency initially increases during storage (positive aging) but is entirely lost upon extended aging (negative aging), hinders further device development. It is uncovered that it is chemical changes to nanocrystal (NC)‐based electron transport layer (ETL) that give rise to positive aging, their drift in structure and morphology leading to transiently improved charge injection balance. Using grazing‐incidence small‐angle X‐ray scattering, it is found that ZnMgO NCs undergo size‐focusing ripening during aging, improving size uniformity and creating a smoother energy landscape. Electron‐only device measurements reveal a sevenfold reduction in trap states, indicating enhanced surface passivation of ZnMgO. These insights, combined with density functional theory calculations of ZnMgO surface binding, inspire an atomic layer deposition (ALD) strategy with Al₂O₃ to permanently suppress surface traps and inhibit NC growth, effectively eliminating aging‐induced efficiency loss. This ALD‐engineered ZnMgO ETL enables reproducible external quantum efficiencies (EQEs) of 17% across 30 batches of LEDs with a T60 of 60 h at an initial luminance of 4500 cd m−2, representing a 1.6‐fold increase in EQE and a tenfold improvement in operating stability compared to control devices.
Phase‐Engineered Bi‐RuO <sub>2</sub> Single‐Atom Alloy Oxide Boosting Oxygen Evolution Electrocatalysis in Proton Exchange Membrane Water Electrolyzer
Abstract Engineering nanomaterials at single‐atomic sites can enable unprecedented catalytic properties for broad applications, yet it remains challenging to do so on RuO 2 ‐based electrocatalysts for proton exchange membrane water electrolyzer (PEMWE). Herein, the rational design and construction of Bi‐RuO 2 single‐atom alloy oxide (SAAO) are presented to boost acidic oxygen evolution reaction (OER), via phase engineering a novel hexagonal close packed ( hcp ) RuBi single‐atom alloy. This Bi‐RuO 2 SAAO electrocatalyst exhibits a low overpotential of 192 mV and superb stability over 650 h at 10 mA cm −2 , enabling a practical PEMWE that needs only 1.59 V to reach 1.0 A cm −2 under industrial conditions. Operando differential electrochemical mass spectroscopy analysis, coupled with density functional theory studies, confirmed the adsorbate‐evolving mechanism on Bi‐RuO 2 SAAO and that the incorporation of Bi 1 improves the activity by electronic density optimization and the stability by hindering surface Ru demetallation. This work not only introduces a new strategy to fabricate high‐performance electrocatalysts at atomic‐level, but also demonstrates their potential use in industrial electrolyzers.
Impact ionization coefficients and excess noise characteristics of <i>Al0.85Ga0.15As0.07Sb0.93</i> on GaSb substrate
We report the multiplication properties of Al0.85Ga0.15As0.07Sb0.93 for use in separate absorption charge and multiplication avalanche photodiode lattice matched to a GaSb substrate. The demonstration of a high gain, low excess noise multiplier lattice matched to GaSb is a critical step toward high performance avalanche photodiodes operating at wavelengths exceeding 2 μm. We have measured impact ionization coefficients of random alloy Al0.85Ga0.15As0.07Sb0.93 grown on GaSb substrates from 210 to 421 kV/cm. Our results show an α value (0.25–40×103 cm−1) significantly greater than β (0.002–4.8×103 cm−1) over the measured field range, indicating this material is a favorable multiplier candidate for electron avalanche photodiodes. We also report excess noise measurements of both p-i-n and n-i-p devices under illumination, resulting in single carrier injection. The p-i-n devices showed a low excess noise of 2.98 at a maximum gain of ∼17, while the n-i-p devices showed a high excess noise of 9.34 at a gain of ∼8, further implicating that this material predominantly multiplies electrons.
Neural mechanisms underlying the after-effects of repetitive paired-pulse TMS with β tACS on the human primary motor cortex
Abstract We previously reported that repetitive paired-pulse transcranial magnetic stimulation (TMS; rPPS) synchronized to the peak phase of transcranial alternating current stimulation (tACS) at the β frequency induced long-lasting after-effects on primary motor cortex (M1) with less inter-individual variability compared with rPPS alone. Here, we investigated the plasticity mechanisms underlying combined stimulation effects using paired-pulse TMS paradigms. rPPS was applied to the peak phase of β tACS (rPPS-tACS-peak) or sham tACS (rPPS alone), or tACS was delivered without rPPS (tACS alone). Resting motor threshold (RMT) and motor evoked potentials (MEPs) elicited by single-pulse TMS, short-interval intracortical inhibition (SICI), intracortical facilitation (ICF), short-latency afferent inhibition (SAI), and short-interval intracortical facilitation (SICF) were measured before and after intervention. rPPS-tACS-peak stimulation significantly increased MEPs compared with other conditions after intervention. Although I-wave interaction was expected to be produced by the facilitation effect of rPPS, rPPS-tACS-peak did not change SICF. In contrast, SAI was decreased in rPPS-tACS-peak compared with baseline. In the control experiment, rPPS-tACS-trough did not change MEPs, SAI, and SICF. Therefore, the after-effects of rPPS-tACS-peak on M1 may be caused by a partial reduction in the inhibitory circuit mediated by cholinergic interneurons, rather than an enhancement of the facilitatory effects of rPPS.
A Printed Microscopic Universal Gradient Interface for Super Stretchable Strain‐Insensitive Bioelectronics
AbstractStretchable electronics capable of conforming to nonplanar and dynamic human body surfaces are central for creating implantable and on‐skin devices for high‐fidelity monitoring of diverse physiological signals. While various strategies have been developed to produce stretchable devices, the signals collected from such devices are often highly sensitive to local strain, resulting in inevitable convolution with surface strain‐induced motion artifacts that are difficult to distinguish from intrinsic physiological signals. Here all‐printed super stretchable strain‐insensitive bioelectronics using a unique universal gradient interface (UGI) are reported to bridge the gap between soft biomaterials and stiff electronic materials. Leveraging a versatile aerosol‐based multi‐materials printing technique that allows precise spatial control over the local stiffnesses with submicron resolution, the UGI enables strain‐insensitive electronic devices with negligible resistivity changes under a 180% uniaxial stretch ratio. Various stretchable devices are directly printed on the UGI for on‐skin health monitoring with high signal quality and near‐perfect immunity to motion artifacts, including semiconductor‐based photodetectors for sensing blood oxygen saturation levels and metal‐based temperature sensors. The concept in this work will significantly simplify the fabrication and accelerate the development of a broad range of wearable and implantable bioelectronics for real‐time health monitoring and personalized therapeutics.
Phytic Acid‐Induced Gradient Hydrogels for Highly Sensitive and Broad Range Pressure Sensing
Abstract Ionic conductive hydrogels have emerged as an excellent option for constructing dielectric layers of interfacial iontronic sensors. Among these, gradient ionic hydrogels, due to the intrinsic gradient elastic modulus, can achieve a wide range of pressure responses. However, the fabrication of gradient hydrogels with optimal mechanical and sensing properties remains a challenge. In this study, it is discovered first that phytic acid (PA) interacts in remarkably distinct manners (i.e., plasticizing effects and phase separation) with different polymers (i.e., polyacrylamide and polyacrylic acid). This distinctive PA‐polymer interacting mechanism is innovatively utilized to construct a modulus gradient ionic hydrogel through a simple precursor solution infiltration approach. The gradient hydrogel‐based flexible pressure sensor not only achieves a high sensitivity (9.00 kPa −1 , <15 kPa) and a broad sensing range (from ≈3.7 Pa to 1.2 MPa) simultaneously, but also exhibits superior low pressure sensing performance. It successfully recognizes the subtle pressure due to acoustic waves and airflow, as well as the moderate pressure due to speaking and finger pressing and the high magnitude of plantar pressure. In addition, the gradient hydrogel demonstrates remarkable antibacterial properties and biocompatibility. This functional hydrogel with excellent sensing performance and bioactivity exhibits exceptional potential for wearable sensing applications.
Enhanced <i>p</i>-type GaN Ohmic contacts through strategic metal schemes and annealing
To enhance the efficiency and performance of p-type GaN-based power devices (diode, MOSFET) and p-channel transistors (p-FET), forming an Ohmic contact with low specific contact resistance (ρc) at p-GaN can be an effective way. However, the specific contact resistance values of p-GaN remain limited to the range of mid-10−2Ω cm2 due to the low activation ratio of Mg dopants and high work function. Here, we propose an Ohmic contact method using a Pd-based metal stack to achieve lower specific contact resistance compared to conventional p-GaN contact metals such as Ni/Au or Pt/Au. A low specific contact resistance of 1.08 × 10−5Ω cm2 was demonstrated for p-GaN by annealing a Pd-based tri-layer metal contact in an oxygen-rich ambient with an optimized Pd thickness. The mechanism driving this low specific contact resistance was investigated using secondary ion mass spectroscopy, transmission electron microscopy, x-ray diffraction, and x-ray photoelectron spectroscopy, which indicated the mutual diffusion of Ni, Pd, and Ga atoms within the metal alloy. A NiO layer was formed on the top of the metal alloy, and Pd-Ga compounds were formed at the metal/p-GaN interface through mutual diffusion of atoms. This process increased the number of Ga vacancies in p-GaN, playing a crucial role in reducing its contact resistance.
Discrepancies in precipitation trends between observational and reanalysis datasets in the Amazon Basin
Machine Learning in Polymer Research
Abstract Machine learning is increasingly being applied in polymer chemistry to link chemical structures to macroscopic properties of polymers and to identify chemical patterns in the polymer structures that help improve specific properties. To facilitate this, a chemical dataset needs to be translated into machine readable descriptors. However, limited and inadequately curated datasets, broad molecular weight distributions, and irregular polymer configurations pose significant challenges. Most off the shelf mathematical models often need refinement for specific applications. Addressing these challenges demand a close collaboration between chemists and mathematicians as chemists must formulate research questions in mathematical terms while mathematicians are required to refine models for specific applications. This review unites both disciplines to address dataset curation hurdles and highlight advances in polymer synthesis and modeling that enhance data availability. It then surveys ML approaches used to predict solid‐state properties, solution behavior, composite performance, and emerging applications such as drug delivery and the polymer–biology interface. A perspective of the field is concluded and the importance of FAIR (findability, accessibility, interoperability, and reusability) data and the integration of polymer theory and data are discussed, and the thoughts on the machine–human interface are shared.
Thermal budget study to simultaneously achieve low-temperature (<b>&lt;</b>400 <b>°</b>C) process and high endurance of ferroelectric Hf0.5Zr0.5O2 thin films
This work comprehensively investigates the thermal budget required to simultaneously achieve low-temperature process conditions and high endurance in atomic layer deposited ferroelectric Hf0.5Zr0.5O2 (HZO) thin films. Because a certain level of thermal budget is required to achieve ferroelectricity in 10 nm HZO thin films, the crystallization temperature can be lowered below 400 °C by simply increasing the annealing time. In addition, the analysis of the crystallization behavior of HZO thin films based on the Johnson–Mehl–Avrami–Kolmogorov model revealed that longer annealing times are required to lower the annealing temperature for HZO crystallization due to the limitation of the crystallization rate. Consequently, low-temperature (&lt;400 °C) ferroelectric HZO thin films with large remanent polarization along with improved leakage behavior and endurance were realized. These results not only facilitate the back-end-of-line integration of HZO thin films but also demonstrate the feasibility of in situ HZO crystallization by thermal budget for subsequent interconnect formation, simplifying the overall process and saving costs by eliminating a dedicated annealing process.
Skin cancer detection using dermoscopic images with convolutional neural network
Modular Design of Lipopeptide‐Based Organ‐Specific Targeting (POST) Lipid Nanoparticles for Highly Efficient RNA Delivery
Abstract Lipid nanoparticles (LNPs) with highly efficient and specific extrahepatic targeting abilities are promising in gene delivery, and the lipopeptides (LPs) with excellent designability and functionality are expected to empower the construction of functional LNPs. This study aims to develop highly efficient ionizable components that accurately match different targeting lipid systems through the modular design of LPs. Based on this, a lipopeptide‐based organ‐specific targeting (POST) LNP screening strategy is constructed, in which lysine‐histidine‐based lipopeptides (KH‐LPs) are designed as highly efficient ionizable components. The optimal KH‐LP LNP screened in vitro shows excellent siRNA/mRNA transfecting ability in various hard‐to‐transfect cell lines. Compared to the classic LNPs, the POST LNPs screened in vivo achieve even higher (or at least comparable) efficiency and specificity in delivering mRNA and siRNA to the lung, liver, and spleen, respectively. The structure‐activity relationship (SAR) proves that the modular regulation of LP structures can accurately provide the optimal ionizable components for different targeting lipid systems, demonstrating the potential of this strategy in developing efficient and selective targeting systems, which is expected to open up more possibilities for gene therapy.
Super‐Resolution Goes Viral: T4 Virus Particles as Versatile 3D‐Bio‐NanoRulers
Abstract In the burgeoning field of super‐resolution fluorescence microscopy, significant efforts are being dedicated to expanding its applications into the 3D domain. Various methodologies have been developed that enable isotropic resolution at the nanometer scale, facilitating the visualization of 3D subcellular structures with unprecedented clarity. Central to this progress is the need for reliable 3D structures that are biologically compatible for validating resolution capabilities. Choosing the optimal standard poses a considerable challenge, necessitating, among other attributes, precisely defined geometry and the capability for specific labeling at sub‐diffraction‐limit distances. In this context, the use of the non‐human‐infecting virus, bacteriophage T4 is introduced as an effective and straightforward bio‐ruler for 3D super‐resolution imaging. Employing DNA point accumulation for imaging in nanoscale topography (DNA‐PAINT) along with the technique of astigmatic imaging, the icosahedral capsid of the bacteriophage T4, measuring 120 nm in length and 86 nm in width, and its hollow viral tail is uncovered. This level of detail in light microscopy represents a significant advancement in T4 imaging. A simple protocol for the production and preparation of samples is further outlined. Moreover, the extensive potential of bacteriophage T4 as a multifaceted 3D bio‐ruler, proposing its application as a novel benchmark for 3D super‐resolution imaging in biological studies is explored.
Application of probabilistic bits in measurement and sensing
We introduce a data-driven measurement and sensing paradigm that capitalizes on the limited sensing capabilities of probabilistic bits (p-bits). Unlike traditional methods that rely on the high quality of individual devices, our approach achieves high precision through the extensive data collected from a large ensemble of p-bits. We demonstrate the feasibility of using magnetic tunnel junction-based p-bits in various applications, such as temperature stability monitoring, passive timekeeping, and weak magnetic field sensing. The paradigm is notably easy to implement and robust against device imperfections and non-uniformity, providing significant advantages in terms of practicality and scalability.
Tunable GH shift based on hyperbolic metamaterials composed of graphene and dielectric
Rare‐Earth Oxychlorides as Promoters of Ruthenium Toward High‐Performance Hydrogen Evolution Electrocatalysts for Alkaline Electrolyzers
AbstractDeveloping efficient electrocatalysts for hydrogen evolution reaction (HER) in alkaline environments is vital for hydrogen production, owing to the extra water dissociation and hydroxyl desorption steps. Here, rare‐earth oxychlorides (REOCl) are proposed as innovative promoters for ruthenium as HER electrocatalyst in alkali. The lamellar structure of REOCl with weakly bond [Cl] layers can facilitate the formation of an internal electric field that enhances interphase charge transfer. Taking ruthenium/ neodymium oxychloride (Ru/NdOCl) composites as a case study, sub ≈4 nm Ru nanoparticles are successfully embedded into NdOCl crystals through a rapid self‐exothermic process, and the highly‐coupled Ru−Cl/O−Nd interfaces are observed as metallic Ru particles with the edge of the NdOCl lamellar layers, where the [Nd2O2] and [Cl] layers act as the negative and positive charge transfer channels, respectively. The enhanced charge transfer between REOCl and Ru makes the highly‐coupled Ru/REOCl catalysts show better electrocatalytic activity than both the benchmark Pt and Ru catalysts in alkaline electrolyte. This work will encourage more novel promoters for electrocatalysis and other emerging technologies.
Megahertz cycling of ultrafast structural dynamics enabled by nanosecond thermal dissipation
Light–matter interactions are of fundamental scientific and technological interest. Ultrafast electron microscopy and diffraction with combined femtosecond-nanometer resolution elucidate the laser-induced dynamics in structurally heterogeneous systems. These measurements, however, remain challenging due to the brightness limitation of pulsed electron sources, leading to an experimental trade-off between resolution and contrast. Larger signals can most directly be obtained by higher repetition rates, which, however, are typically limited to a few kilohertz by the thermal relaxation of thin material films. Here, we combine nanometric electron beam probing with sample support structures tailored to facilitate rapid specimen cooling. Optical cycling of a charge-density wave transformation enables quantifying the mean temperature increase induced by pulsed laser illumination. Varying the excitation fluence and repetition rate, we gauge the impact of excitation confinement and efficient dissipation on the heat diffusion in different sample designs. In particular, a thermally optimized support can dissipate average laser intensities of up to 200 μW/μm2 within a few nanoseconds, allowing for reversible driving and probing of the CDW transition at a repetition rate of 2 MHz. Sample designs tailored to ultrafast measurement schemes will thus extend the capabilities of electron diffraction and microscopy, enabling high-resolution investigations of structural dynamics.