Browse Articles

Discover research articles across all indexed journals

Women with clinically node negative breast cancer can safely avoid axillary surgery

Nature Reviews Clinical Oncology Peter Sidaway Mar 01, 2025 DOI: 10.1038/s41571-024-00982-z

p53-mediated regulation of LINE1 retrotransposon-derived R-loops

Journal of Biological Chemistry Pratyashaa Paul, Arun Kumar, Ankita Subhadarsani Parida et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108200

Impact of quantum well thickness on efficiency loss in InGaN/GaN LEDs: Challenges for thin-well designs

Applied Physics Letters Xuefeng Li, Nick Pant, Sheikh Ifatur Rahman et al. Mar 01, 2025 DOI: 10.1063/5.0258108

We investigate the impact of quantum well (QW) thickness on efficiency loss in c-plane InGaN/GaN LEDs using a small-signal electroluminescence technique. Multiple mechanisms related to efficiency loss are independently examined, including injection efficiency, carrier density vs current density relationship, phase space filling, quantum-confined Stark effect, and Coulomb enhancement. An optimal QW thickness of around 2.7 nm in these InGaN/GaN LEDs was determined for QWs having constant In composition. Despite improved control of deep-level defects and lower carrier density at a given current density, LEDs with thin QWs still suffer from an imbalance in enhancement effects on the radiative and intrinsic Auger–Meitner recombination coefficients. The imbalance in enhancement effects results in a decline in internal quantum efficiency and radiative efficiency with decreasing QW thickness at low current density in LEDs with QW thicknesses below 2.7 nm. We also investigate how LED modulation bandwidth varies with QW thickness, identifying the key trends and their implications for device performance.

Treatment advances across the cervical cancer spectrum

Nature Reviews Clinical Oncology Alex A. Francoeur, Bradley J. Monk, Krishnansu S. Tewari Mar 01, 2025 DOI: 10.1038/s41571-024-00977-w

Drosophila Modulo is essential for transposon silencing and developmental robustness

Journal of Biological Chemistry Rasesh Y. Parikh, Dhananjaya Nayak, Haifan Lin et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108210

Spin Hall effect in 3<i>d</i> ferromagnetic metals for field-free switching of perpendicular magnetization: A first-principles investigation

Applied Physics Letters Fanxing Zheng, Jianting Dong, Yizhuo Song et al. Mar 01, 2025 DOI: 10.1063/5.0255152

Ferromagnetic metals, with the potential to generate spin current with unconventional spin polarization via the spin Hall effect, offer promising opportunities for field-free switching of perpendicular magnetization and for spin–orbit torque devices. In this study, we investigate two distinct spin Hall mechanisms in 3d ferromagnetic metals including spin–orbit coupling driven spin Hall effect in Fe, Co, Ni, and their alloys, and non-relativistic spin Hall effect arising from anisotropic spin-polarized transport by taking L10-MnAl as an example. By employing first-principles calculations, we examine the temperature and alloy composition dependence of spin Hall conductivity in Fe, Co, Ni, and their alloys. Our results reveal that the spin Hall conductivities with out-of-plane spin polarization in 3d ferromagnetic metals are on the order of 1000 ℏ/2e(Ω cm)−1 at 300 K, but with a relatively low spin Hall angles around 0.01–0.02 due to the large longitudinal conductivity. For L10-MnAl(101), the non-relativistic spin Hall conductivity can reach up to 10 000 ℏ/2e(Ω cm)−1, with a giant spin Hall angle around 0.25 at room temperature. By analyzing the magnetization switching process, we demonstrate deterministic switching of perpendicular magnetization without an external magnetic field by using 3d ferromagnetic metals as spin current sources. Our work may provide an unambiguous understanding of the spin Hall effect in ferromagnetic metals and pave the way for their potential applications in related spintronic devices.

A CRISPR-edited isoform of the AMPK kinase LKB1 improves the response to cisplatin in A549 lung cancer cells

Journal of Biological Chemistry Matheus Brandemarte Severino, Ana Paula Morelli, Isadora Carolina Betim Pavan et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108308

Formic acid-engineered PEDOT:PSS for enhanced crystallinity and performance in tin–lead perovskite solar cells

Applied Physics Letters Qinglong Jiang, Jiebin Wu, Cheng Chen et al. Mar 01, 2025 DOI: 10.1063/5.0254767

Organic–inorganic hybrid perovskite solar cells (PSCs) have shown tremendous promise due to their excellent optoelectronic properties and cost-efficient fabrication. However, the efficiency of traditional lead halide PSCs is approaching the Shockley–Queisser limit, prompting interest in tin-lead perovskite solar cells (Eg ≈ 1.25 eV) as a candidate for tandem configurations with the potential to surpass this limit. A key challenge lies in optimizing the hole transport layer (HTL), as widely used PEDOT:PSS suffers from high acidity and poor crystallinity, hindering device performance. In this work, we used a formic acid modification of PEDOT:PSS to enhance its conductivity, energy band alignment, and crystallinity. Acid treatment promotes proton transfer, reducing insulating PSS chains and improving phase separation, thereby facilitating efficient hole transport. Tin–lead perovskite films fabricated on formic acid-treated PEDOT:PSS (Fa-PEDOT:PSS) exhibit improved crystallinity, larger grain size, and reduced defect density. Devices incorporating Fa-PEDOT:PSS demonstrate enhanced photovoltaic performance, achieving a power conversion efficiency (PCE) of 21.87% with reduced hysteresis and excellent stability, retaining ∼90% of initial efficiency after 1600 h in an inert atmosphere. These findings highlight the potential of acid-treated PEDOT:PSS as an optimized HTL for tin–lead PSCs, paving the way for high-efficiency, environmentally friendly photovoltaic technologies.

Imlunestrant shows efficacy both with and without abemaciclib

Nature Reviews Clinical Oncology David Killock Mar 01, 2025 DOI: 10.1038/s41571-024-00983-y

Cyclophilin J limits linear ubiquitin signaling and controls colorectal cancer progression

Journal of Biological Chemistry Chunjie Sheng, Chen Yao, Jing Wang et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108323

Strain-driven anomalous thickness dependence of interfacial thermal conductance between dissimilar metals

Applied Physics Letters Zhongyin Zhang, Ziyang Wang, Kunpeng Yuan et al. Mar 01, 2025 DOI: 10.1063/5.0252298

Understanding thermal transport behaviors across dissimilar metal films is essential for optimizing electronic devices' performance and efficiency. However, the effect of interfacial parameters such as the thickness on interfacial thermal conductance (G) of metal/metal remains elusive. In this Letter, the G between Al and Cu with varying Cu thickness was investigated from 78 to 295 K using the time domain thermoreflectance technique combined with nonequilibrium molecular dynamics (NEMD) simulations and the diffuse mismatch model (DMM). The temperature dependence of GAl/Cu follows a pattern that is consistent with phonon-related thermal transport behaviors and decreases with increasing Cu thickness. The phonon related behaviors are attributed to the existence of the oxide layer at the interface. By taking the oxide layer into account, NEMD and DMM calculations match well with the experimental results, proving that the oxide layer hinders electron transport across the interface. We further find that strain distributions in Cu layers have a negative correlation with Cu thickness. When applying compressive strain on Cu, the overlap of phonon density of states between Cu and Al increases, especially for phonons of 6.5–9 THz, which is responsible for the Cu thickness-dependence in GAl/Cu. Our results not only help revealing strain effect on G but also pave the way for the thermal design of metal interconnect in integrated circuits.

Downregulation of the phosphatase PHLPP1 contributes to NNK-induced malignant transformation of human bronchial epithelial cells (HBECs)

Journal of Biological Chemistry Xuelei Liu, Shirui Huang, Xiaozhen Gu et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108221

Theoretical limits for energy density of aligned ferromagnetic nanoparticles in a nonmagnetic matrix for rare-earth-free permanent magnets

Applied Physics Letters Shouvik Sarker, Md Mahadi Rajib, Radhika Barua et al. Mar 01, 2025 DOI: 10.1063/5.0233620

Developing permanent magnets with fewer critical elements requires understanding hysteresis effects and coercivity through visualizing magnetization reversal. Here, we numerically investigate the effect of the geometry of nanoscale ferromagnetic inclusions in a paramagnetic/nonmagnetic matrix to understand the key factors that maximize the magnetic energy product of such nanocomposite systems. Specifically, we have considered a matrix of “3 μm × 3 μm × 40 nm” dimension, which is a sufficiently large volume, two-dimensional representation considering that the ferromagnetic inclusions' thickness is less than 3.33% of the lateral dimensions simulated. Using this approach, which minimizes edge effects to approximate bulk-like magnetic behavior while remaining computationally tractable for simulation, we systematically studied the effect of the thickness of ferromagnetic strips, separation between the ferromagnetic strips due to the nonmagnetic matrix material, different saturation magnetization values, and the length of these ferromagnetic strips on magnetic coercivity and remanence by simulating the hysteresis loop plots for each geometry. Furthermore, we study the underlying micromagnetic mechanism for magnetic reversal to understand the factors that could help attain the maximum magnetic energy densities for ferromagnetic nanocomposite systems in a paramagnetic/nonmagnetic material matrix. In this study, we have used material parameters of an exemplary Alnico alloy system, a rare-earth-free, thermally stable nanocomposite, which could potentially replace high-strength NdFeB magnets in applications that do not require large energy products. However, we project the energy density (BH)max of materials with higher saturation magnetization to have an ideal theoretical limit of (BH)max ∼94 kJ/m3 (∼12 MGOe), which is ∼(35%–40%) of the energy density of Rare-Earth Free Magnets. This energy density could be higher if exchange bias from antiferromagnets, defects, and pinning is included and could stimulate further experimental work on the fabrication and large-scale manufacturing of RE-free PMs with different nanocomposite systems.

Control of Two Solid Electrolyte Interphases at the Negative Electrode of an Anode‐Free All Solid‐State Battery based on Argyrodite Electrolyte

Advanced Materials Yixian Wang, Vikalp Raj, Kaustubh G. Naik et al. Mar 01, 2025 DOI: 10.1002/adma.202410948

AbstractAnode‐free all solid‐state batteries (AF‐ASSBs) employ “empty” current collector with three active interfaces that determine electrochemical stability; lithium metal – Solid electrolyte (SE) interphase (SEI‐1), lithium – current collector interface, and collector – SE interphase (SEI‐2). Argyrodite Li6PS5Cl (LPSCl) solid electrolyte (SE) displays SEI‐2 containing copper sulfides, formed even at open circuit. Bilayer of 140 nm magnesium/30 nm tungsten (Mg/W‐Cu) controls the three interfaces and allows for state‐of‐the‐art electrochemical performance in half‐cells and fullcells. AF‐ASSB with NMC811 cathode achieves 150 cycles with Coulombic efficiency (CE) above 99.8%. With high mass‐loading cathode (8.6 mAh cm−2), AF‐ASSB retains 86.5% capacity after 45 cycles at 0.2C. During electrodeposition of Li, gradient Li‐Mg solid solution is formed, which reverses upon electrodissolution. This promotes conformal wetting/dewetting by Li and stabilizes SEI‐1 by lowering thermodynamic driving force for SE reduction. Inert refractory W underlayer is required to prevent ongoing formation of SEI‐2 that also drives electrochemical degradation. Inert Mo and Nb layers likewise protect Cu from corroding, while Li‐alloying layers (Mg, Sn) are less effective due to ongoing volume changes and associated pulverization. Mechanistic explanation for observed Li segregation within alloying LixMg layer is provided through mesoscale modelling, considering opposing roles of diffusivity differences and interfacial stresses.

Profiling Tel1 signaling reveals a non-canonical motif targeting DNA repair and telomere control machineries

Journal of Biological Chemistry William J. Comstock, Shrijan Bhattarai, Ethan J. Sanford et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108194

Design of low-activation refractory high-entropy alloys with improved plasticity

Applied Physics Letters Xuan Xiao, Jia-Wei Zhang, Chuang-Shi Feng et al. Mar 01, 2025 DOI: 10.1063/5.0258818

Low-activation refractory high-entropy alloys (LARHEAs) as structural materials have a great demand in nuclear reactors. However, currently developed LARHEAs generally have poor room temperature ductility, which greatly limits their wide applications. In this study, two kinds of LARHEAs with chemical compositions of TiZrTaCr and TiZrTaV in equal atomic percentage were designed based on low neutron absorption cross section, low neutron activation, and mixing enthalpy parameters. The LARHEA samples were prepared by high vacuum arc-melting techniques, and their phase structures and mechanical properties were studied. It was found that the TiZrTaCr LARHEA exhibited two body-center-cubic (BCC) and one Cr2Zr intermetallic compound phases, and it had a yield strength of 1364 ± 54 MPa, but it was brittle, while the TiZrTaV LARHEA formed three BCC solid solution phases, and it had a high yield strength of 1312 ± 57 MPa with a room temperature compression plasticity of 13% ± 0.8%. Cr2Zr intermetallic compound formation in the solid solution matrix could have led to the brittleness of the LARHEAs, which was mainly due to the large negative mixing enthalpy of the Cr element with Zr element in this alloy system. This study proposed a basic method for LARHEA design to optimize the microstructures and improve the mechanical properties as structural materials.

Binding of small molecules at the P-stalk site of ricin A subunit trigger conformational changes that extend into the active site

Journal of Biological Chemistry John E. McLaughlin, Michael J. Rudolph, Arkajyoti Dutta et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108310

710 GHz GaN gradient doped Schottky barrier diode with high breakdown voltage

Applied Physics Letters Xiufeng Song, Shenglei Zhao, Kui Dang et al. Mar 01, 2025 DOI: 10.1063/5.0253346

In this work, a 710 GHz GaN Schottky barrier diode (SBD) with high breakdown voltage was proposed and fabricated. The high-frequency SBDs suffer from the trade-off between the frequency (fc) and breakdown voltage (Vbr). We solved this problem with the gradient doping technique, and the fc and Vbr were improved at the same time. For the proposed gradient doped GaN SBD, the doping concentration of the drift layer increases gradually from top to bottom. Then, the capacitance was reduced by the lightly doped surface region, while the series resistance was reduced by the heavily doped bottom region. As a result, fc was improved, and a high fc of 710 GHz was obtained. In addition, Vbr was also enhanced by the lightly doped surface region, and a high Vbr of 28 V was achieved. As a consequence, fc · Vbr of the proposed SBD is about 2 times that of the previous GaN SBDs, which is a great improvement. The gradient doping technology fully exploits the potential of GaN SBD in high frequency and high voltage, making GaN SBD a promising candidate for terahertz (THz) applications.

Complement-activated fragment Ba functions as an antibacterial protein and mediates immune responses in lower vertebrates

Journal of Biological Chemistry Xiao-yan Jin, Hong-qiang Zhang, Zhe Feng et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108278

Competing polar phases in 2D ferroelectric transition metal thio- and selenophosphates

Applied Physics Letters Sabine Neumayer, Huimin Qiao, Nina Balke Mar 01, 2025 DOI: 10.1063/5.0253879

The aim of this Perspective is to provide an in-depth discussion of a certain class of 2D ferroelectrics that feature a van der Waals gap where more than one polar phase can exist energetically close to the ground state. Polar phases of interest can include different ferroelectric, antiferroelectric, and paraelectric phases, which can be transformed into each other through external stimuli, offering unprecedented control over polar material properties. With this level of control, important size limitations and integration problems can be overcome, and material platforms with tunable polar properties for multi-functional devices and sensors can be developed for the next generation of information and energy technologies. We highlight the co-existence of polar properties that have been found on local scales using advanced local characterization techniques as well as methods to control polar properties in transition metal thio-/selenophosphates. We give an overview of future challenges and opportunities in this emerging field of energetically close polar phases.