Advanced Materials
Articles in this Issue
Electrolyte‐Regulated Self‐Healing Cu/Oxide Interfaces for Stable Electrocatalysis in Strong Acid
ABSTRACT Metastable metal active sites are inherently difficult to preserve under strongly corrosive electrochemical conditions, because continuous dissolution d...
The Impact of Copolymer Molecular Sequence on Electronic Transport
ABSTRACT Established relationships describe how the energetics and spacing of polarons impact electronic transport in conjugated homo...
Bio‐Inspired Site‐Specific Atomic Repair for Energy‐Efficient Regeneration of Spent LiFePO <sub>4</sub> Batteries
ABSTRACT Solid‐state sintering regeneration offers a promising strategy for repairing spent lithium iron phosphate (LFP) cathodes, yet conventional homogeneous‐m...
Selective Pt–S Anchoring at Interfacial Defects for Atom‐Economical Solar Hydrogen Production
ABSTRACT Defects in photocatalysts strongly influence charge transfer behavior, and selectively exploiting defect‐rich interfacial sites as chemically addressabl...
Bioorthogonal Anchor‐and‐Lock of Probiotic Biofilms on Diverse Biomaterials to Combat Delayed Implant‐Associated Infection
ABSTRACT Bacterial adhesion and biofilm formation on implants remain a leading cause of device failure, and delayed‐onset infections become refractory to antibio...
Engineering Mesoporous Composite Nanospheres With Metal Core and Metal Oxide Shell for Plasmonic Promoted Gas Sensing
ABSTRACT Nanoengineering of core‐shell nanostructures integrating plasmonic metal cores and mesoporous semiconducting metal oxide (SMO) shells hold significant p...
High‐Performance Heterocyclic Aramid Fibers Reinforced by Graphene Oxide for Advanced Impact‐Resistant Applications
ABSTRACT High‐performance fiber materials, poly(p‐phenylene‐benzimidazole‐terephthalamide) (PBIA) fibers, exhibit exceptional mechanical properties, and they are...
Synergistic Spin‐Polarization Effect and Magnetic Exchange Interaction of Core/Shell Structure for Bifunctional Oxygen Electrocatalysis
ABSTRACT Rechargeable zinc‐air batteries (RZABs) are hindered by sluggish oxygen reduction and evolution (ORR/OER) kinetics. While core/shell nanostructures can...
Tailoring Superwettability Through Bioinspired Reentrant Microstructures
ABSTRACT Superwettability describes an extreme wetting regime in which a solid surface exhibits exceptional affinity for or strong repellency against fluids, including superhydro/sup...
Terahertz Full‐Set Multi‐Bit Logic Operations with High‐Dimensional Multiplexed Surface Plasmonic Vortices
ABSTRACT On‐chip photonic logic operations are emerging as a leading candidate for post‐Moore's computing and the terahertz (THz) band is crucial for next‐genera...
Dynamic Strain Regulation Via Photoresponsive Fullerenes Enables High‐Performance and UV‐Robust Perovskite Solar Cells
ABSTRACT The long‐term stability of perovskite solar cells (PSCs) is critically undermined by degradation at the buried interface, where residual tensile strain...
Bio‐Inspired High‐Low Toughness Multilayer Mechanoluminescent Composite With Superior Mechanical Properties
ABSTRACT Polydimethylsiloxane confers stretchability, enhanced brightness, mechanical responsivity and self‐charging capability to mechanoluminescence materials,...
Magnetic Composite Formed by Exsolution for Enhanced Exchange Coupling and Breaking the Permeability‐Frequency Limitation
ABSTRACT The development of ferrite‐based absorbers for high‐frequency integrated electronics and fifth‐generation (5G) communication systems has long been constrained by the Snoek l...
Tuning the Conversion Mechanisms of Metal–Sulfur Batteries: From Nanostructures to Single Atoms
ABSTRACT Rechargeable metal–sulfur (M–S) batteries (Li, Na, K, Al, Zn, Mg, Ca, Cu, Fe‑based) are promising alternatives to conventional lithium‑ion batteries, featuring high energy d...
A Ferromagnetic Polar Metal With Efficient Electrical Switch of Magnetism
ABSTRACT Materials that host intrinsic coexisting ferromagnetism, polar distortion, and metallicity, a ferromagnetic polar metal (FPM), can combine the advantage...
Direct Modeling of the Interfacial Resistance in All‐Solid‐State Battery
ABSTRACT Interfacial reconstruction and its associated high resistance govern the performance of all‐solid‐state batteries (ASSBs). However, indirectly inferring...
Decoupled Catalysis in Lithium‐Oxygen Batteries: Directed Oxygen‐Species Spillover Between Dual Single‐Atoms to Circumvent Linear Scaling Limit
ABSTRACT Oxygen species spillover across sites in heterogeneous catalysis is a core strategy for reconfiguring reaction pathways and overcoming the theoretical l...
Multi‐Wavelength Upconversion Lasers Based on Coordination Polymer Glass Incorporating Lanthanide‐Doped Nanoparticles
ABSTRACT Upconversion microlasers hold great promise for next‐generation photonic devices. Most current designs rely on coating or incorporating lanthanide‐doped...
Construction of Multiply Bridged Coordination Framework via a Cluster‐Ligand Strategy
ABSTRACT In the context of reticular chemistry, linking secondary building units (SBUs) through multiple bridging modes could enhance structural robustness and f...
Photoactive Tweezers
ABSTRACT The manipulation of micro/nanoscale objects plays a critical role across a wide range of scientific and engineering disciplines. Photoactive colloids, c...
In Situ Dynamic Reconstruction Asymmetric P─Co─O/OH Sites for Sustainable Gram‐Level Electrocatalytic Ammonia Production
ABSTRACT The electrochemical conversion of nitrite/nitrate (NO x − ) to ammonia (NH...
A Single OLED With Hybrid Synaptic Plasticity Enabling In Situ Neuromorphic Processing and Visualization
ABSTRACT As the core interface for human–computer interaction, multitask intelligent display systems face increasingly stringent demands regarding precision and functional integratio...
Intramolecular Polarization‐Mediated Solvation and Interphase Engineering for Low‐Temperature High‐Voltage Lithium Metal Batteries
ABSTRACT Simultaneously achieving stable lithium metal batteries (LMBs) under cryogenic and high‐voltage conditions remains a fundamental challenge due to uncont...
A Non‐Equilibrium Flame Aerosol Process to Create High‐Entropy MOFs
ABSTRACT High‐entropy alloys and ceramics have demonstrated promising applications in the past decade. Ultrafast heating and cooling can kinetically trap immiscible elements into sol...
Reducing Voltage Hysteresis of FeF <sub>2</sub> via Oxygen Doping and Nano‐Disordering in Sulfide All‐Solid‐State Batteries
ABSTRACT Conversion‐type metal fluorides are promising cathode candidates for high‐energy‐density post‐lithium batteries. Unfortunately, their practical implemen...