Browse Articles

Discover research articles across all indexed journals

Polyamines enhance repeat-associated non-AUG translation from CCUG repeats by stabilizing the tertiary structure of RNA

Journal of Biological Chemistry Akihiro Oguro, Takeshi Uemura, Kodai Machida et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108251

Toward roll-to-roll ALD of thermoelectric Al-doped ZnO thin films on flexible nanostructured PET membranes

Applied Physics Letters Esa Alakoski, Sami Kinnunen, Girish C. Tewari et al. Mar 01, 2025 DOI: 10.1063/5.0245804

Thin films are an effective way of manufacturing thermoelectric (TE) sensors for biomedical devices and wearable electronics. Excellent conformality and sub-nanometer thickness control of atomic layer deposition (ALD) make it a promising method of preparing TE thin films on flexible polymer and textile substrates suitable for sensor use. Here, Al-doped ZnO films were deposited on flexible perforated polyethylene terephthalate (PET) templates with 50/1 diethylzinc/trimethylaluminum pulsing ratio at a low temperature of 100 °C. Thermoelectric properties of the resulting nanocomposites were measured. The application potential of the present ALD-made TE coatings on flexible PET films for future roll-to-roll fabrication is discussed.

Bioinspired Disordered Aerogel for Omnidirectional Terahertz Response

Advanced Materials Hui‐Ya Wang, Pengfei Hu, Xiao‐Bo Sun et al. Mar 01, 2025 DOI: 10.1002/adma.202418889

AbstractThe structural disorder of the black butterfly assists in capturing sunlight across a wider spectral and angular range, injecting infinite vitality for omnidirectional and stimuli‐responsive wave‐absorbing materials. Here, the disordered micro‐pores responding to terahertz (THz) waves through electromagnetic simulations, and then prepared via ice templating technology are analyzed and optimized. The customized disordered aerogel makes possible perfect terahertz response property with incidence‐angle‐insensitive and ultra‐broadband. Ti3C2Tx MXene/carboxymethyl cellulose aerogels realize excellent shielding effectiveness exceeding 70.32 dB and reflection loss of more than 43.02 dB over the frequency range of 0.3–1.5 THz. Tailoring the structural orientation of anisotropic aerogels functions as a versatile dynamic modulation approach along terahertz propagation direction. The porous structure with moderate conductivity gradually triggers the resonance effect of the cavity, approximating a resonance sphere (pore) and waveguide system (tube). Ultimately, gradient impedance aerogel is proposed integrating THz‐infrared stealth, hydrophobicity, and mechanical strength. This inspired biomimetic structural strategy will also enable various terahertz applications such as terahertz imaging, line‐of‐sight telecommunication, information encryption, and space exploration.

Light-chain split luciferase assay implicates pathological NOTCH3 thiol reactivity in inherited cerebral small vessel disease

Journal of Biological Chemistry Naw May Pearl Cartee, Soo Jung Lee, Emily Wu et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108224

Strain-induced <i>κ</i>-to-<i>β</i> phase transition and intermediate layer formation at the <i>κ</i>-Ga2O3/<i>β</i>-Ga2O3 interface

Applied Physics Letters Songhao Gu, Ke Xu, Mei Cui et al. Mar 01, 2025 DOI: 10.1063/5.0254348

Polarization engineering can enable high-density two-dimensional electron gas (2DEG) at the interface of ferroelectric/non-polar κ-Ga2O3/β-Ga2O3 hybrid polymorph structures, whereas the formation of a disordered intermediate layer has prevented the experimental observation of 2DEG, with phase transition being the primary obstacle. In this work, we investigate κ-Ga2O3 epilayers of varying thickness grown on β-Ga2O3 substrates to elucidate the strain-driven phase transition within the intermediate layer at the κ-Ga2O3/β-Ga2O3 polymorph interface. Reciprocal space mapping and high-resolution transmission electron microscopy analyses reveal that a pseudomorphic wetting layer forms during the early growth, followed by the nucleation of mixed κ/β-phase islands. As the film thickens, strain drives further κ-to-β transitions and thickens the disordered intermediate β-phase layer. First-principles calculations confirm that the κ-to-β phase transition is triggered when the in-plane strain exceeds the threshold value of 2.7%. These findings provide critical insights into phase transitions in Ga2O3 hybrid polymorph structures and suggest future strategies for enhancing interface quality, which is crucial for enabling a high-density 2DEG channel through polarization engineering toward the next generation of Ga2O3-based electronic devices.

In‐device Battery Failure Analysis

Advanced Materials Guannan Qian, Guibin Zan, Jizhou Li et al. Mar 01, 2025 DOI: 10.1002/adma.202416915

AbstractLithium‐ion batteries are indispensable power sources for a wide range of modern electronic devices. However, battery lifespan remains a critical limitation, directly affecting the sustainability and user experience. Conventional battery failure analysis in controlled lab settings may not capture the complex interactions and environmental factors encountered in real‐world, in‐device operating conditions. This study analyzes the failure of commercial wireless earbud batteries as a model system within their intended usage context. Through multiscale and multimodal characterizations, the degradations from the material level to the device level are correlated, elucidating a failure pattern that is closely tied to the specific device configuration and operating conditions. The findings indicate that the ultimate failure mode is determined by the interplay of battery materials, cell structural design, and the in‐device microenvironment, such as temperature gradients and their fluctuations. This holistic, in‐device perspective on environmental influences provides critical insights for battery integration design, enhancing the reliability of modern electronics.

Crystal structure of cytochrome P450 NysL and the structural basis for stereo- and regio-selective oxidation of antifungal macrolides

Journal of Biological Chemistry Vidhi C. Murarka, Jenny S. Kim, David C. Lamb et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108185

Simulation study of cell permeabilization induced by pulsed magnetic field considering radial stress effects

Applied Physics Letters Chi Ma, Wei Zheng, Fei Teng et al. Mar 01, 2025 DOI: 10.1063/5.0254777

Non-contact pulsed magnetic fields can enhance the permeability of biological cells, creating an innovative approach for delivering external substances through cell membranes. However, the mechanism by which pulsed magnetic fields cause cell permeabilization remains unclear, and experimental findings from different researchers often vary widely, sometimes even contradicting one another. To gain a deeper understanding of cell permeabilization caused by pulsed magnetic fields, this study uses a theoretical analytical approach. It begins with a qualitative analysis of how the induced electric field and radial stress generated by a time-varying magnetic field affect the free energy of pores from an energy perspective. Next, a numerical model is developed to quantitatively explore the dynamic changes in pores driven by the induced electric field and radial stress. The results demonstrate that, compared to the numerical model considering only the induced electric field, the model incorporating both the induced electric field and radial stress increases the predicted pore expansion capability by 161.8%. This enhancement allows for more accurate predictions of pore formation on the cell membrane under the influence of pulsed magnetic fields. This study incorporates radial stress into a pore-opening dynamics model under pulsed magnetic fields and develops an associated numerical model, thereby providing a foundation for elucidating the permeabilization mechanisms of pulsed magnetic fields.

Harmine promotes axon regeneration through enhancing glucose metabolism

Journal of Biological Chemistry Ruixuan Liu, Bing Zhou Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108254

Assessing the achievable quantification accuracy of magnetic moments in noisy electron magnetic chiral dichroism spectra using modeling

Applied Physics Letters Qiwen Hu, Yu Zhuo, Xiaoxiao Fu et al. Mar 01, 2025 DOI: 10.1063/5.0248940

Electron magnetic chiral dichroism (EMCD) technique enables quantitative measurements of spin and orbital moments at a sub-nanometer resolution in principle, while it is practically challenging at high resolutions due to noise problems. Our work proposed a mathematical model that can be used to synthesize EMCD spectra with controllable noise levels and settable true values of magnetic moments. Using the model, the achievable quantification accuracy at different noise levels has been systematically assessed. The assessment has revealed the chain noise effect in routine post-processing steps and provided essential experimental instructions to improve quantification precision and accuracy at given noise levels. The ineffectiveness of several denoising methods in improving accuracy and precision has also been verified. Our work may stimulate the development of noise-dependent post-processing algorithms applicable to EMCD and advance the technique application, especially in research with a high demand for accuracy, such as mapping interfacial magnetic structures in nanomaterials.

Ultrafast Infrared Plasmonics

Advanced Materials Yang Luo, Zhiyuan Sun, Zhipei Sun et al. Mar 01, 2025 DOI: 10.1002/adma.202413748

AbstractUltrafast plasmonics represents a cutting‐edge frontier in light‐matter interactions, providing a unique platform to study electronic interactions and collective motions across femtosecond to picosecond timescales. In the infrared regime, where energy aligns with the rearrangements of low‐energy electrons, molecular vibrations, and thermal fluctuations, ultrafast plasmonics can be a powerful tool for revealing ultrafast electronic phase transitions, controlling molecular reactions, and driving subwavelength thermal processes. Here, the evolution of ultrafast infrared plasmonics, discussing the recent progress in their manipulation, detection, and applications is reviewed. The future opportunities, including their potential to probe electronic correlations, investigate intrinsic ultrafast plasmonic interactions, and enable advanced applications in quantum information are highlighted, which may be promoted by multi‐physical field integrated ultrafast techniques.

An engineered palivizumab IgG2 subclass for synthetic gp130 and fas-mediated signaling

Journal of Biological Chemistry Christoph Wittich, Julia Ettich, Marcel Hertell et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108205

Enhancing spin–orbit torque in tri-layer devices with an ultra-thin light metal spacer

Applied Physics Letters Durgesh Kumar Ojha, Liang-Juan Chang, Yu-hui Wu et al. Mar 01, 2025 DOI: 10.1063/5.0253761

The discovery of spin current generation through an additional ferromagnetic layer has unlocked new possibilities for spin–orbit torque (SOT) devices, particularly in tri-layer SOT configurations. This breakthrough facilitates field-free switching (FFS) with perpendicular magnetic anisotropy (PMA) under the influence of z-polarization. Despite this progress, a significant challenge persists in lowering the switching current density (JSW) in SOT devices, which remains roughly an order of magnitude higher than in spin-transfer torque devices. We incorporated an ultra-thin (1 nm) copper (Cu) spacer into a tri-layer SOT structure where the orange peel effect likely arose. This ultra-thin Cu layer, combined with the optimized Pt-based SO layer, resulted in approximately a 35% reduction in JSW compared to the scenario without Cu insertion. The damping-like torque efficiency was analyzed concerning the FFS performance at optimized Cu spacer thickness to support the finding of JSW reduction. Using magneto-optic Kerr effect measurements and micromagnetic simulations, we identified domain nucleation as the primary mechanism driving FFS, confirming the role of z-polarization in reducing JSW effectively. This study proposes a design that simultaneously addresses three key challenges of PMA, JSW, and FFS in current SOT systems.

Tissue Mimetic Membranes for Healing Augmentation of Tendon–Bone Interface in Rotator Cuff Repair

Advanced Materials Yuwei Zhu, Bingyang Dai, Shian Zhang et al. Mar 01, 2025 DOI: 10.1002/adma.202407358

AbstractThe globally prevalent rotator cuff tear has a high re‐rupture rate, attributing to the failure to reproduce the interfacial fibrocartilaginous enthesis. Herein, a hierarchically organized membrane is developed that mimics the heterogeneous anatomy and properties of the natural enthesis and finely facilitates the reconstruction of tendon–bone interface. A biphasic membrane consisting of a microporous layer and a mineralized fibrous layer is constructed through the non‐solvent induced phase separation (NIPS) strategy followed by a co‐axial electrospinning procedure. Cationic kartogenin (KGN)‐conjugated nanogel (nGel‐KGN) and osteo‐promotive struvite are incorporated within the membranes in a region‐specific manner. During in vivo repair, the nGel‐KGN‐functionalized microporous layer is adjacent to the tendon which intends to suppress scar tissue formation at the lesion and simultaneously heightens chondrogenesis. Meanwhile, the struvite‐containing fibrous layer covers the tubercula minus to enhance stem cell aggregation and bony ingrowth. Such tissue‐specific features and spatiotemporal release behaviors contribute to effective guidance of specific defect‐healing events at the transitional region, further leading to the remarkably promoted regenerative outcome in terms of the fibrocartilaginous tissue formation, collagen fiber alignment, and optimized functional motion of rotator cuff. These findings render a novel biomimetic membrane as a promising material for clinical rotator cuff repair.

Drug resistance–associated mutations in Plasmodium UBP-1 disrupt its essential deubiquitinating activity

Journal of Biological Chemistry Cameron J. Smith, Heledd Eavis, Carla Briggs et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108266

Flexible tuning of asymmetric near-field radiative thermal transistor by utilizing distinct phase-change materials

Applied Physics Letters Hexiang Zhang, Xuguang Zhang, Fangqi Chen et al. Mar 01, 2025 DOI: 10.1063/5.0256162

Phase-change materials (PCMs) play a pivotal role in the development of advanced thermal devices due to their reversible phase transitions, which drastically modify their thermal and optical properties. In this study, we present an effective dynamic thermal transistor with an asymmetric design that employs distinct PCMs, vanadium dioxide (VO2), and germanium antimony telluride (GST), on either side of the gate terminal, which is the center of the control unit of the near-field thermal transistor. This asymmetry introduces unique thermal modulation capabilities, taking control of thermal radiation in the near-field regime. VO2 transitions from an insulating to a metallic state, while GST undergoes a reversible switch between amorphous and crystalline phases, each inducing substantial changes in thermal transport properties. By strategically combining these materials, the transistor exhibits enhanced functionality, dynamically switching between states of absorbing and releasing heat by tuning the temperature of gate. This gate terminal not only enables active and efficient thermal management but also provides effective opportunities for manipulating heat flow in radiative thermal circuits. Our findings highlight the potential of such asymmetrically structured thermal transistors in advancing applications across microelectronics, high-speed data processing, and sustainable energy systems, where precise and responsive thermal control is critical for performance and efficiency.

Facing the “Cutting Edge:” Edge Site Engineering on 2D Materials for Electrocatalysis and Photocatalysis

Advanced Materials Yiran Ying, Ke Fan, Zezhou Lin et al. Mar 01, 2025 DOI: 10.1002/adma.202418757

AbstractThe utilization of 2D materials as catalysts has garnered significant attention in recent years, primarily due to their exceptional features including high surface area, abundant exposed active sites, and tunable physicochemical properties. The unique geometry of 2D materials imparts them with versatile active sites for catalysis, including basal plane, interlayer, defect, and edge sites. Among these, edge sites hold particular significance as they not only enable the activation of inert 2D catalysts but also serve as platforms for engineering active sites to achieve enhanced catalytic performance. Here it is comprehensively aimed to summarize the state‐of‐the‐art advancements in the utilization of edge sites on 2D materials for electrocatalysis and photocatalysis, with applications ranging from water splitting, oxygen reduction, and nitrogen reduction to CO2 reduction. Additionally, various approaches for harnessing and modifying edge sites are summarized and discussed. Here guidelines for the rational engineering of 2D materials for heterogeneous catalysis are provided.

Correction: Three prime repair exonuclease 1 preferentially degrades the integration-incompetent HIV-1 DNA through favorable kinetics, thermodynamic, structural, and conformational properties

Journal of Biological Chemistry Prem Prakash, Purva Khodke, Muthukumar Balasubramaniam et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108213

Enhanced Curie temperature in atomically thin perpendicular magnetic anisotropic oxide film through interfacial engineering

Applied Physics Letters Daolong Liu, Mingzhu Xue, Caihong Jia et al. Mar 01, 2025 DOI: 10.1063/5.0255286

The inverse spinel oxide NiCo2O4, known for its high Curie temperature, low resistivity, and perpendicular magnetic anisotropy, is a promising candidate for the development of next-generation spintronic devices. However, reducing the thickness of the NiCo2O4 film to a few atomic layers degrades its room temperature magnetic and electrical properties, limiting its practical application. In this study, a Co3O4 buffer layer is introduced into ultrathin NiCo2O4 films, which significantly enhances the Curie temperature beyond room temperature and reduces the resistivity, while preserving the strong perpendicular magnetic anisotropy as well as the robust anomalous Hall effect. It is found that the sheet resistance dramatically decreases with the increase in Co3O4 thickness. The observed phenomena may originate from the increased occupation of Ni3+ ions at octahedral sites due to the interfacial coupling, resulting in the intrinsic linear relationship between resistivity and Curie temperature. Additionally, the scaling relation between the anomalous Hall conductivity and longitudinal conductivity highlights the complex interaction between spin-dependent impurity scattering and the band intrinsic Berry curvature. This study indicates that interfacial coupling is an effective strategy for tuning the physical properties of oxides, providing a promising avenue for the application of NiCo2O4-based materials in miniaturized spintronic devices.

Biochemical and biophysical characterization of inositol-tetrakisphosphate 1-kinase inhibitors

Journal of Biological Chemistry Martin Y. Ng, Huanchen Wang, Haibo Zhang et al. Mar 01, 2025 DOI: 10.1016/j.jbc.2025.108274