Browse Articles

Discover research articles across all indexed journals

Development of a new software for pore measurements in foraminifera and the constraints of pore proxy under high oxygen conditions

Scientific Reports Rohan Subba, Anupam Ghosh, Rinku Kumar Mittal et al. Mar 01, 2025 DOI: 10.1038/s41598-025-91821-3

PKC modulator promotes remyelination

Nature Reviews Drug Discovery Sarah Crunkhorn Mar 01, 2025 DOI: 10.1038/d41573-025-00020-2

Cooperative Magnetic Interfacial Microrobot Couple for Versatile Non‐Contact Biomedical Applications

Advanced Materials Bowen Chen, Hao Wu, Yiyu Chen et al. Mar 01, 2025 DOI: 10.1002/adma.202417416

AbstractMagnetic interfacial microrobots are increasingly recognized as a promising approach for potential biomedical applications ranging from electronic functionalization to minimally invasive surgery and targeted drug delivery. Nevertheless, existing research faces challenges, including less cooperative interactions, contact‐based cargo manipulation, and slow transport velocity. Here, the cooperative magnetic interfacial microrobot couple (CMIMC) is proposed to address the above challenges. The CMIMC can be maneuvered by a single magnet and readily switched between capture and release states. By leveraging cooperative interactions and meticulous engineering of capillary forces through shape design and surface treatment, the CMIMC demonstrates the ability to perform non‐contact cargo manipulation. Using the synergy of preferred magnetization directions and magnetic field distribution, along with optimization of the resistance‐reducing shape, the CMIMC significantly enhances the cargo transport velocity, reaching 12.2 body length per second. The studies demonstrate various biomedical applications like targeted drug delivery and myomectomy, paving the way for the broad implementation of interfacial microrobots in biomedical fields.

Stretchable Blue Phase Liquid Crystal Lasers with Optical Stability Based on Small‐Strain Nonlinear 3D Asymmetric Deformation

Advanced Materials Yanqing Chen, Chenglin Zheng, Wenjie Yang et al. Mar 01, 2025 DOI: 10.1002/adma.202416448

AbstractBlue phase liquid crystal (BPLC) lasers exhibit exceptional optical quality and tunability to external stimuli, holding significant promise for innovative developments in the field of flexible optoelectronics. However, there remain challenges for BPLC elastomer (BPLCE) lasers in maintaining good optical stability during stretching and varying temperature conditions. In this work, a stretchable laser is developed based on a well‐designed BPLCE with a combination of partially and fully crosslinked networks, which can output a single‐peak laser under small deformation (44.429 nm lasing shift at 32% strain) and a broad‐temperature range (from −20 to 100 °C). The superior performance can be attributed to the nonlinear 3D asymmetric deformation exhibited by the BPI lattice during stretching, particularly at low deformation rates below 40% strain, which effectively maintains the stability of the body‐centered cubic structure (with the maximum strain of this BPLCE up to 220%). Moreover, the BPLCE exhibits excellent thermal stability over a temperature range from −180 to 70 °C with a stopband shift of less than ±10 nm. As a proof‐of‐concept, the application of BPLCE laser for morphology sensing and 3D mechanical perception is demonstrated, which paves the way for potential applications of flexible optoelectronics.

Inverse design of high-performance piezoelectric semiconductors via advanced crystal representation and large language models

Applied Physics Letters Chen Zhang, Siyuan Lv, Haojie Gong et al. Mar 01, 2025 DOI: 10.1063/5.0247738

The inverse design of solid-state materials with targeted properties represents a significant challenge in materials science, particularly for piezoelectric semiconductors where both structural symmetry and electronic properties must be carefully controlled. Here, we employ the simplified line-input crystal-encoding system representation combined with the MatterGPT framework for discovering potential piezoelectric semiconductors. By training on a curated dataset of 1556 piezoelectric materials from the Materials Project database, our model learns to generate crystal structures with targeted piezoelectric properties through an autoregressive sampling process. Starting from approximately 5000 generated structures, we implemented a comprehensive screening workflow incorporating structural validity, thermodynamic stability, and property verification. This approach identified several promising candidates from 4100 reconstructed structures, each representing compounds unrecorded in existing databases. Among these, the most notable material demonstrated a piezoelectric stress coefficient of 25.9 C/m2 in the e[1,6] direction. Additionally, these materials demonstrate suitable bandgaps ranging from 1.63 to 3.61 eV, suggesting potential applications in high-sensitivity sensors and high-temperature electronics. Our work demonstrates the effectiveness of combining crystal structure language encoding with generative models for accelerating the discovery of functional materials with targeted properties.

Oncofertility Barriers in Nurses Caring for Women with Breast Cancer

Scientific Reports Li Hu, Chaoting Zheng, Binbin Xu et al. Mar 01, 2025 DOI: 10.1038/s41598-025-91404-2

Mechanically Compatible Sealing of Hydrogel with Coherent Interface

Advanced Materials Daohang Cai, Rui Xia, Yan Shao et al. Mar 01, 2025 DOI: 10.1002/adma.202414515

Abstract Long‐term operation of hydrogels relies on protective coatings to avoid water swelling or evaporation, but these protections often cause substantial decreases in overall softness and stretchability. Here, a mechanically compatible seal with a coherent interfacial design is developed to encapsulate hydrogels. This seal is made from polybutylene (PIB) and polypropylene‐graft‐maleic anhydride (PP‐g‐MAH) blended poly(styrene‐isobutylene‐styrene) (SIBS). The PIB oligomers soften the SIBS networks, while the MAH groups facilitate covalent bonding between the SIBS and hydrogel. The sealed hydrogel exhibits an elastic modulus of 24 kPa and an elongation at a break of >1000%, both comparable to those of the pristine hydrogel. The adhesion energy between the seal and hydrogel reached >140 J m −2 and can be further increased to >400 J m −2 by a thermal treatment. This tough interface, together with the intrinsically low water vapor transmission rate of SIBS, allows the sealed hydrogel to maintain its modulus and stretchability after 10 days of drying in air. The sealed hydrogel is chemically and mechanically stable under harsh conditions, including acidic/alkaline/salty solutions, high temperatures, and cyclic mechanical deformation. This strategy applies to various hydrogels with diverse compositions and structures, leading to orders of magnitude improvements in the longevity of hydrogel‐based electronic devices.

Cation‐Vacancy Engineering in Cobalt Selenide Boosts Electrocatalytic Upcycling of Polyester Thermoplastics at Industrial‐Level Current Density

Advanced Materials Jun Qi, Yongming Xia, Xiangtong Meng et al. Mar 01, 2025 DOI: 10.1002/adma.202419058

Abstract The past decades have witnessed the increasing accumulation of plastics, posing a daunting environmental crisis. Among various solutions, converting plastics into value‐added products presents a significant endeavor. Here, an electrocatalytic upcycling route that efficiently converts waste poly(butylene terephthalate) plastics into high‐value succinic acid with high Faradaic efficiency of 94.0% over cation vacancies‐rich cobalt selenide catalyst is reported, showcasing unprecedented activity (1.477 V vs. RHE) to achieve an industrial‐level current density of 1.5 A cm −2 , and featuring a robust operating durability (≈170 h). In particular, when combining butane‐1,4‐diol monomer oxidation (BOR) with hydrogen evolution using the cation vacancy‐engineered cobalt selenide as bifunctional catalyst, a relatively low cell voltage of 1.681 V is required to reach 400 mA cm −2 , manifesting an energy‐saving efficiency of ≈15% compared to pure water splitting. The mechanism and reaction pathways of BOR over the vacancies‐rich catalyst are first revealed through theoretical calculations and in‐situ spectroscopic investigations. The generality of this catalyst is evidenced by its powerful electrocatalytic activity to other polyester thermoplastics such as poly(butylene succinate) and poly(ethylene terephthalate). These electrocatalytic upcycling strategies can be coupled with the reduction of small molecules (e.g., H 2 O, CO 2 , and NO 3 − ), shedding light on energy‐saving production of value‐added chemicals.

Perspective on doublet electroluminescence from organic radicals

Applied Physics Letters You-Jun Yu, Feng Li Mar 01, 2025 DOI: 10.1063/5.0246006

The doublet emission from organic open-shell monoradicals is spin-allowed, enabling 100% internal quantum efficiency when electroexcitation occurs in organic light-emitting diodes. Research works on luminescent organic radicals have shown significant potential for high-efficiency electroluminescence, achieving device efficiencies comparable to those of close-shell emitters. This Perspective reviews recent advancements in spin-doublet organic monoradicals, highlighting molecular design principles, device optimizations, and potential futures.

A cross dataset meta-model for hepatitis C detection using multi-dimensional pre-clustering

Scientific Reports Aryan Sharma, Tanmay Khade, Shashank Mouli Satapathy Mar 01, 2025 DOI: 10.1038/s41598-025-91298-0

Abstract Hepatitis C is a liver infection triggered by the hepatitis C virus (HCV). The infection results in swelling and irritation of the liver, which is called inflammation. Prolonged untreated exposure to the virus can lead to chronic hepatitis C. This can result in serious health complications such as liver damage, hepatocellular carcinoma (HCC), and potentially death. Therefore, rapid diagnosis and prompt treatment of HCV is crucial. This study utilizes machine learning (ML) to precisely identify hepatitis C in patients by analyzing parameters obtained from a standard biochemistry test. A hybrid dataset was acquired by merging two commonly used datasets from individual sources. A portion of the dataset was used as a hold-out set to simulate real-world data. A multi-dimensional pre-clustering approach was used in this study in the form of k-means for binning and k-modes for categorical clustering. The pre-clustering approach was used to extract a new feature. This extracted feature column was added to the original dataset and was used to train a stacked meta-model. The model was compared against baseline models. The predictions were further elaborated using explainable artificial intelligence. The models used were XGBoost, K-nearest neighbor, support vector classifier, and random forest (RF). The baseline score obtained was 94.25% using RF, while the meta-model gave a score of 94.82%.

Designing proteins targeting neosurfaces

Nature Reviews Drug Discovery Sarah Crunkhorn Mar 01, 2025 DOI: 10.1038/d41573-025-00019-9

Dynamic magnetoelectric effect of the polar magnet CaBaCo4O7

Applied Physics Letters Yingjie He, Deshun Hong, Na Su et al. Mar 01, 2025 DOI: 10.1063/5.0265593

We have investigated the temperature and magnetic field dependence of the dynamic magnetoelectric coefficient αE of the polar magnet CaBaCo4O7. The temperature dependence of αE exhibits a peak at the magnetic transition temperature TC in zero magnetic field, evidencing an enhanced magnetoelectric effect near the phase boundary. When a DC magnetic field is applied along either a- or b-axis, the peak position of αE shifts continuously to a higher temperature while the peak amplitude reaches the maximum at a critical field and decays for higher magnetic fields. The obtained magnetoelectric phase diagram suggests that the maximum dynamic magnetoelectric effect occurs in a region above TC where short-range magnetic correlations play a crucial role and the peak is due to a metamagnetic transition. The measurements of the magnetostrictive coefficient dλ/dH reveal that the magnetoelectric effect is closely related to the magnetoelastic coupling. Our study provides insights toward achieving significant dynamic magnetoelectric effect at high temperatures in polar magnets.

Real time task planning for order picking in intelligent logistics warehousing

Scientific Reports Shaohui Zhang, Qiuying Han, Hai Zhu et al. Mar 01, 2025 DOI: 10.1038/s41598-025-88305-9

Degrading aurora kinase A in neuroblastoma

Nature Reviews Drug Discovery Sarah Crunkhorn Mar 01, 2025 DOI: 10.1038/d41573-025-00018-w

Heterodimeric Photosensitizer as Radical Generators to Promoting Type I Photodynamic Conversion for Hypoxic Tumor Therapy

Advanced Materials Tao Xiong, Yingchao Chen, Qiang Peng et al. Mar 01, 2025 DOI: 10.1002/adma.202410992

Abstract Photodynamic therapy (PDT) using traditional type II photosensitizers (PSs) has been limited in hypoxic tumors due to excessive oxygen consumption. The conversion from type II into a less oxygen‐dependent type I PDT pathway has shown the potential to combat hypoxic tumors. Herein, the design of a heterodimeric PS, NBSSe , by conjugating a widely used type I PS NBS and a type II PS NBSe via molecular dimerization, achieving the aggregation‐regulated efficient type I photodynamic conversion for the first time is reported. Electrochemistry characterizations and theoretical calculations elucidate that NBSSe tends to form a S +· /Se −· radical pair via intramolecular electron transfer in the co‐excited NBSSe * aggregate, realizing 7.25‐fold O 2 −· generation compared to NBS and 80% suppression of 1 O 2 generation compared to NBSe . The enhanced O 2 −· generation of NBSSe enables excellent anti‐hypoxia PDT efficiency and inhibition of pulmonary metastasis. Additionally, the incorporation of electron‐rich bovine serum albumin accelerates the recycling of cationic PS radical NBSSe +· , further boosting photostability and O 2 −· generation. The resultant BSA@NBSSe nanoparticles demonstrate successful tumor‐targeting PDT capability. This work provides an appealing avenue to convert ROS generation from the type II pathway to the type I pathway for efficient cancer phototherapy in hypoxia.

Spin-to-charge conversion at KTaO3(111) interfaces

Applied Physics Letters Athby H. Al-Tawhid, Rui Sun, Andrew H. Comstock et al. Mar 01, 2025 DOI: 10.1063/5.0247001

Rashba spin–orbit coupling locks the spin with the momentum of charge carriers at the broken inversion interfaces, which could generate a large spin galvanic response. Here, we demonstrate spin-to-charge conversion (inverse Rashba–Edelstein effect) in KTaO3(111) two-dimensional electron systems. We explain the results in the context of electronic structure, orbital character, and spin texture at the KTaO3(111) interfaces. We also show that the angle dependence of the spin-to-charge conversion on in-plane magnetic field exhibits a nontrivial behavior, which matches the symmetry of the Fermi states. Results point to opportunities to use spin-to-charge conversion as a tool to investigate the electronic structure and spin texture.

A cautionary note on the potential pitfalls of using N-terminal truncated CD63 to label small extracellular vesicles

Scientific Reports Elias Sulaiman, Derek M. Yellon, Sean M. Davidson Mar 01, 2025 DOI: 10.1038/s41598-025-91597-6

Abstract Small extracellular vesicles (sEV) are nanosized vesicles that facilitate intracellular communication. A significant research obstacle is the isolation of sEV devoid of non-sEV contaminants. Immunoaffinity capture with sEV-specific antibodies is an attractive approach to purifying sEV, but it risks disrupting the vesicles during antibody dissociation. Furthermore, immunoaffinity capture may require the modification of EV-specific proteins for the incorporation of tags on the EV surface, with unknown implications on EV production and function. The aim of this study was to investigate whether a previously reported CD63 truncation is efficient for the incorporation of small tags on the extravesicular surface. We therefore conjugated ALFA-tag to N-terminal-truncated CD63, and included nanoluciferase at the C-terminus, for luminescent tracing of the sEV. Full-length CD63-nanoluciferase was used as a control. Plasmid constructs expressing these proteins were transfected into HEK293 cells. In contrast to a previous report, the N-terminal truncation of CD63 impaired its membrane localisation and reduced the yield of EVs. Further investigation revealed that some of the tagged CD63 was co-localized with aggresomes and was preferentially secreted from the cells as soluble protein rather than being associated with sEV. These results demonstrate that CD63 truncation can impair its function and EV yield, potentially generating misleading results.

FDA approves new non-opioid pain drug

Nature Reviews Drug Discovery Katie Kingwell Mar 01, 2025 DOI: 10.1038/d41573-025-00022-0

High-performance, broadband, and self-driven photodetector based on MoTe2 homojunction with asymmetrical contact interfaces

Applied Physics Letters Kangwei Shao, Zhengjin Weng, Haiyan Nan et al. Mar 01, 2025 DOI: 10.1063/5.0254935

The van der Waals junction of two-dimensional materials has the characteristics of weak interlayer interaction and strong light–mass interaction. The internal electric field formed at the interface of Van der Waals junction promotes the separation and efficient transfer of photogenerated carriers, showing the characteristics of low power consumption, self-drive, high responsiveness, and ultrafast response. Therefore, we fabricate a transverse homojunction photodetector by mechanical stripping. Furthermore, considering the influence of the contact between the two sides of the metal electrodes, we select the metal electrodes corresponding to the matching work function according to the Fermi level with different thicknesses of MoTe2, and two anti-barrier layers are obtained. Finally, a transverse homojunction self-driven photodetector with Au-thin MoTe2-thick MoTe2–Ni/Au structure is fabricated, which improves the photosensitivity and response time, and broadens the spectral detection range. When Vds = 0 V, the rectifier ratio increases to 4.6 × 103, which is 50 times higher than that of symmetrical electrode homojunction. Under zero bias voltage, when the spot area is 3 × 10−9 m2, the photosensitivity reaches 28 mA/W (637 nm), the response time is 38.83/40.17 μs, and the infrared detection is extended to 1550 nm. It has potential applications in optoelectronics and optical signal detection.

Enhancing the power quality of dual rotor wind turbines using improved fuzzy space vector modulation and super twisting sliding techniques

Scientific Reports Habib Benbouhenni, Nicu Bizon, Mourad Yessef et al. Mar 01, 2025 DOI: 10.1038/s41598-025-90914-3