Browse Articles
Discover research articles across all indexed journals
Quantum‐Dot‐Electrolyte Light‐Emitting Diodes for Displays
Abstract Electroluminescence (EL) is essential for modern technologies, such as displays, lighting, and optical communications. To date, some kinds of artificial EL devices have been developed, including organic light‐emitting diodes (OLEDs), quantum‐dot (QD) LEDs, and light‐emitting electrochemical cells. However, issues (e.g., inefficient charge injection, exciton quenching) limit the further EL performance. Here, another promising kind of EL device is reported, which is called QD‐electrolyte LED (QE‐LED). The key feature of QE‐LED is that an ionic liquid is doped into QDs as the electrolyte emitter of multi‐layer device architectures. Both theoretical and experimental analyses reveal that an enhanced interface electric field from the in situ formed electrical double layer is leveraged to improve the charge injection and transport. With the introduction of insulating polymers into QD‐electrolyte emitters, red QE‐LED achieves an external quantum efficiency of 20.5% and a lifetime (T 95 ) over 3.74 × 10 5 h at the display‐related luminance of 100 cd m −2 , indicating that the QE‐LED is among the best EL devices. Furthermore, an active‐matrix QE‐LED display is demonstrated with superior stability that overtakes the commercial benchmark. These results offer an avenue to discover unexplored EL devices and provide potential pathways to enhance charge dynamics for EL devices.
Local Polarization Piezoelectric Electric Field Promoted Water Dissociation for Hydroxyl Radical Generation under Ambient Humidity Condition
Abstract Combining piezocatalysts with mechanical ball milling for dissociating water to generate hydroxyl radicals (·OH) offers unprecedented opportunities for energy conversion and environmental remediation. However, the in‐depth insights into the relationship between water and local polarization piezoelectric electric field (LPPEF) are currently lacking, in particularly, the ·OH formation mechanism in ball milling driven piezocatalyst system is not systematically elucidated. To this end, the present work constructs a ball milling driven piezoelectric solid/liquid interface between piezoelectric Pb 2 B 5 O 9 Cl (PBOC) and different contents of water to investigate LPPEF initiated catalytic reaction. Results show that PBOC exhibits an excellent Tetrabromobisphenol A (TBBPA) degradation efficiency with a 68.94 and 12.43 times faster rate constant than traditional SiO 2 and BaTiO 3 , respectively. Under ambient humidity condition, the lower energy barrier of water dissociation (0.23 eV) endows ·OH generation more energetically favorable than under the water‐oversaturated condition (0.66 eV), and trace water magnifies the polarizability of [BO 3 ] and [BO 4 ] units in PBOC to initiate an enhanced LPPEF, thus it enhances the trapping of lone pairs electrons in trace adsorbed water by holes to contribute a higher yield of ·OH. This study constructs a highly correlated field‐initiated electron transfer system that provides opportunities for promoting the performance of piezocatalytic materials.
Single-shot Fourier ptychography using polarization-encoded illumination
Fourier ptychography (FP) is widely adopted for label-free, high-resolution quantitative phase imaging (QPI) of biological samples. However, its imaging speed is limited by the need for multiple acquisitions. In this work, we propose a single-shot FP technique that uses linear polarizers to encode multiple illumination wavevectors and a polarization camera to capture multiple sets of information simultaneously. A multiplexed FP algorithm, utilizing both the bright-field and dark-field information, reconstructs a high-resolution quantitative phase image from the single-shot intensity image. Verified with resolution targets and a histological sample, our method achieved a resolution improvement of 2.5 times the diffraction limit of the objective lens and provided QPI over a large field-of-view. Additionally, we demonstrated high-speed FP at 75 frames per second, limited only by the sensor's readout speed, enabling QPI of fast-moving microorganisms.
Provision, cough efficacy and treatment satisfaction of mechanical insufflation-exsufflation in a large multicenter cohort of patients with amyotrophic lateral sclerosis
Abstract In patients with amyotrophic lateral sclerosis (ALS), mechanical insufflation-exsufflation (MI-E) addresses cough deficiency to achieve major therapeutic goals: improving costal muscle and joint function, reducing atelectasis through insufflation, and clearing bronchial secretions via exsufflation. Despite its perceived benefits, there is limited systematic research on MI-E provision, symptom alleviation, or patient satisfaction. The research platform Ambulanzpartner coordinated this longitudinal observational study conducted in 12 German ALS centers from July 2018 to September 2023. Patients were enrolled based on ALS-related cough deficiency requiring MI-E therapy. The study recorded provision, reasons for withholding MI-E, clinical parameters, therapy frequency, subjective cough deficiency, and symptomatic relief. Satisfaction with MI-E therapy was determined by the likelihood of recommendation. Out of 694 ALS patients indicated for MI-E, 527 (75.9%) received the therapy. The primary reason for non-provision was that the patient had died before provision (n = 66 of 167; 39.5%). These patients were significantly more affected as represented by higher progression rates and lower cough peak flows (CPF) at the time of MI-E indication ( p < 0.05). Most patients who received MI-E used it daily (n = 290 of 370; 78.4%). Self-assessed cough deficiency correlated with clinical measurements, especially for patients with higher deficits. At follow-up visits, patients reported reduced cough deficiency ( p < 0.001). Frequent MI-E use was linked to greater symptom relief and higher likelihood of recommending the therapy. This study highlights the symptomatic and palliative potential of MI-E therapy for ALS patients.
Double Confinement Design to Access Highly Stable Intermetallic Nanoparticles for Fuel Cells
AbstractMaintaining the stability of low Pt catalysts during prolonged operation of proton exchange membrane fuel cells (PEMFCs) remains a substantial challenge. Here, a double confinement design is presented to significantly improve the stability of intermetallic nanoparticles while maintaining their high catalytic activity toward PEMFCs. First, a carbon shell is coated on the surface of nanoparticles to form carbon confinement. Second, O2 is introduced during the annealing process to selectively etch the carbon shell to expose the active surface, and to induce the segregation of surface transition metals to form Pt‐skin confinement. Overall, the intermetallic nanoparticles are protected by carbon confinement and Pt‐skin confinement to withstand the harsh environment of PEMFCs. Typically, the double confined Pt1Co1 catalyst exhibits an exceptional mass activity of 1.45 A mgPt−1 at 0.9 V in PEMFCs tests, with only a 17.3% decay after 30 000 cycles and no observed structure changes, outperforming most reported PtCo catalysts and DOE 2025 targets. Furthermore, the carbon confinement proportion can be controlled by varying the thickness of the coated carbon shell, and this strategy is also applicable to the synthesis of double‐confined Pt1Fe1 and Pt1Cu1 intermetallic nanoparticles.
2D Nanochannel Interlayer Realizing High‐Performance Lithium–Sulfur Batteries
Abstract Commercialization of lithium–sulfur (Li–S) batteries is largely limited by polysulfide shuttling and sluggish kinetics. Herein, 2D nanochannel interlayer composed of alternatively‐stacked porous silica nanosheets (PSN) and Ti 3 C 2 T x ‐MXene are developed. The 2D nanochannels with selective cation transport characteristics facilitate lithium ion rapid transport, while reject the translocation of polysulfide anions across the separator. The hydroxylated MXene shifts the p ‐band center of the surface O on PSN closer to the Fermi level, leading to strong absorptive/catalytic effect for polysulfides and thus fast polysulfide transformation kinetics. Together with the ion/electron bi‐conduction function of PSN/MXene, the Li–S batteries deliver high initial capacity of 1443 mAh g −1 at 0.1 C, low‐capacity decay rate of 0.049% per cycle over 800 cycles at 2 C, and excellent rate capability. At a high sulfur loading of 5.2 mg cm −2 , the cells present higher areal specific capacity than commercial lithium ion batteries. The pouch cells with lean electrolyte (E/S = 3.9 µL mg −1 ) yield a capacity of 2‐Ah at 100 mA, high energy density and excellent cycling stability. This contribution opens up new avenues for expanding application of 2D nanofluidics in electrochemical energy storage and conversion.
Line width narrowing of superconducting nanowire single photon detectors using atomic layer etching
Superconducting nanowire single photon detectors (SNSPDs) have shown remarkable photon detection characteristics, and scalable architectures allow for the fabrication of SNSPD cameras with over a hundred thousand pixels. Producing such large format devices requires the use of a high throughput lithography process such as stepper photolithography. This restricts nanowire widths to the resolution limit of the photolithography system, which limits performance, particularly for mid-infrared wavelengths. In this paper, we develop an SNSPD fabrication process that uses bidirectional atomic layer etching to reduce nanowire widths by &gt; 100 nm, achieving performance that has only previously been attained using low throughput electron beam lithography. This fabrication process will allow for high-pixel count SNSPD cameras with improved performance due to reduced nanowire widths.
Profiling of RNA N6-Methyladenosine methylation reveals the critical role of m6A in betaine alleviating hepatic steatosis
Interface Engineering of 2D Materials toward High‐Temperature Electronic Devices
AbstractHigh‐temperature electronic materials and devices are highly sought after for advanced applications in aerospace, high‐speed automobiles, and deep‐well drilling, where active or passive cooling mechanisms are either insufficient or impractical. 2D materials (2DMs) represent promising alternatives to traditional silicon and wide‐bandgap semiconductors (WBG) for nanoscale electronic devices operating under high‐temperature conditions. The development of robust interfaces is essential for ensuring that 2DMs and their devices achieve high performance and maintain stability when subjected to elevated temperatures. This review summarizes recent advancements in the interface engineering of 2DMs for high‐temperature electronic devices. Initially, the limitations of conventional silicon‐based materials and WBG semiconductors, alongside the advantages offered by 2DMs, are examined. Subsequently, strategies for interface engineering to enhance the stability of 2DMs and the performance of their devices are detailed. Furthermore, various interface‐engineered 2D high‐temperature devices, including transistors, optoelectronic devices, sensors, memristors, and neuromorphic devices, are reviewed. Finally, a forward‐looking perspective on future 2D high‐temperature electronics is presented. This review offers valuable insights into emerging 2DMs and their applications in high‐temperature environments from both fundamental and practical perspectives.
Maximizing Output Energy via Suppressing Charge Loss and Increasing Load Voltage in Charge Extraction Process
Abstract The effective collection of interfacial tribo‐charges and an increase in load voltage are two essential factors that improve the output energy of triboelectric nanogenerators. However, some tribo‐charges are hardly collected through one or multiple integrated side electrodes based on corona discharge, and their load voltages are limited by air breakdown in adjacent electrodes. In this study, a dynamic quasi‐dipole potential distribution model is proposed to systematically reveal the mechanisms of interfacial tribo‐charge loss. Based on this model, an optimization route is designed to reduce the interfacial charge loss stepwise, achieving a 15‐fold improvement in charge collection from the tribo‐interface. A potential difference enhancement strategy is used for the first time to increase the air breakdown threshold between the inner electrodes and increase the output voltage under a large load. By effective increase in charge collection efficiency and load voltage, a historical record output energy density of 5.03 J m −2 is obtained. This study refined and optimized the interfacial charge loss mechanisms and provided advanced guidance for efficiently extracting energy during the triboelectrification process.
Tunable magneto-optical Kerr effect in two-dimensional non-collinear antiferromagnetic material HfFeCl6
With the development of two-dimensional (2D) magnetic materials, the magneto-optical Kerr effect (MOKE) is widely used to measure ferromagnetism in 2D systems. Although this effect is usually inactive in antiferromagnets (AFM), recent theoretical studies have demonstrated that the presence of MOKE relies on the symmetry of the system and antiferromagnets with noncollinear magnetic order can also induce a significant MOKE signal even without a net magnetization. However, this phenomenon is rarely studied in 2D systems due to the scarcity of appropriate materials hosting noncollinear AFM order. Here, based on first-principles calculations, we investigate the HfFeCl6 monolayer with noncollinear Y-AFM ground states, which simultaneously breaks the time-reversal (T) and time-inversion (TI) symmetry, activating the MOKE even though with zero net magnetic moment. In addition, four different MOKE spectra can be obtained in the four permutation states of spin chirality and crystal chirality. The MOKE spectra are switchable when reversing both crystal and spin chirality. Our study provides a material platform to explore the MOKE effect and can potentially be used for electrical readout of AFM states.
A covalent chemical probe for Chikungunya nsP2 cysteine protease with antialphaviral activity and proteome-wide selectivity
Abstract Chikungunya is a mosquito-borne viral disease that causes fever and severe joint pain for which there is no direct acting drug treatments. Vinyl sulfone SGC-NSP2PRO-1 (3) was identified as a potent inhibitor of the nsP2 cysteine protease (nsP2pro) that reduced viral titer against infectious isolates of Chikungunya and other alphaviruses. The covalent warhead in 3 captured the active site C478 and inactivated nsP2pro with a k inact/K i ratio of 5950 M–1 s–1. The vinyl sulfone 3 was inactive across a panel of 23 other cysteine proteases and demonstrated remarkable proteome-wide selectivity by two chemoproteomic methods. A negative control analog SGC-NSP2PRO-1N (4) retained the isoxazole core and covalent warhead but demonstrated > 100-fold decrease in enzyme inhibition. Both 3 and 4 were stable across a wide range of pH in solution and upon prolonged storage as solids. Vinyl sulfone 3 and its negative control 4 will find utility as high-quality chemical probes to study the role of the nsP2pro in cellular studies of alphaviral replication and virulence.
Topology‐Oriented Lymph Node Drainage of Dendritic Polymer‐TLR Agonist Conjugates to Enhance Vaccine Immunogenicity
AbstractStrategically targeting lymph nodes (LNs) to orchestrate the initiation and regulation of adaptive immune responses is one of the most pressing challenges in the context of vaccination. Herein, a series of polymer‐TLR agonist conjugates (PTACs) is developed to investigate the impact of dendritic‐topological characteristics on their LN targeting activity in vivo, and their molecular weight (MW) on their pharmacokinetics in support of their LN homing. Notably, the dendritic 6‐arm PTAC with a MW of 60 kDa (6A‐PTAC‐60k) rapidly delivered cargo to draining LNs after administration to peripheral tissues. Specifically, this topologic structure ameliorated the targeting behavior within lymphatic vessels and LNs, including an elevated amount of TLR7/8 agonist delivered to the LNs, an improved distribution pattern among barrier cells and immune cells, increased permeability, and prolonged retention. Furthermore, the 6A‐PTAC‐60k formulation induced broad antibody and T cell responses, enhancing vaccine immunogenicity and suppressing tumor growth. The results revealed that both the topology and MW of polymers are crucial factors for immunoadjuvant distribution and their functional activity in the draining LNs, which, in turn, enhanced the immunogenicity of the vaccine formulation. This study may provide a chemical and structural basis for optimizing the design of immunoadjuvant delivery systems.
Interfacial Atomic Mechanisms of Single‐Crystalline MoS<sub>2</sub> Epitaxy on Sapphire
AbstractThe epitaxial growth of molybdenum disulfide (MoS₂) on sapphire substrates enables the formation of single‐crystalline monolayer MoS₂ with exceptional material properties on a wafer scale. Despite this achievement, the underlying growth mechanisms remain a subject of debate. The epitaxial interface is critical for understanding these mechanisms, yet its exact atomic configuration has previously been unclear. In this study, a monolayer single‐crystalline MoS₂ grown on a sapphire substrate is analyzed, decisively visualizing the atomic structure of the epitaxial interface and elucidating its role in epitaxial growth from an atomic perspective. The findings reveal that the interface consists of a periodic molecular MoO3 interlayer, van der Waals epitaxially grown on a single Al‐terminated sapphire surface. Additionally, it is discovered that MoO3 coverage enhances surface interactions and introduces a unique atomic arrangement with 1‐fold symmetry at the sapphire surface, thereby facilitating the unidirectional alignment of MoS₂. This discovery provides valuable insights into the growth mechanisms leading to single‐crystalline MoS₂ formation, and suggests pathways for quantitatively monitoring and controlling growth dynamics, for the improvement of material quality and process repeatability, applicable for single‐crystalline MoS₂ or potentially other transition metal dichalcogenides epitaxially grown on sapphire.
Near-field enhanced solid-state thermionic power generation
The lack of low-work function materials and the negative space charge effect have long prevented vacuum thermionic energy converters (VTECs) from becoming a practical means of power generation. Advancements in microfabrication have since provided solutions to these challenges, such as the suppression of negative space charge via a micro/nanoscale interelectrode vacuum gap distance, reigniting interest in VTECs as a potential clean energy technology. However, the limited operational lifetimes of many low-work function coatings have hindered their practical device-level implementation. Solid-state thermionic energy converters (SSTECs) have been proposed as a viable alternative to VTECs since they do not require an interelectrode vacuum gap or low-work function electrodes. Nevertheless, SSTECs still require a large temperature gradient between electrodes and are limited to low operating voltages. To address these limitations, we propose a near-field enhanced solid-state thermionic energy converter (NF-SSTEC), which leverages the advantages of SSTECs by eliminating the need for a large temperature gradient between the electrodes and increasing the range of possible operating voltages. We theoretically demonstrate conversion efficiencies of 16.8 % and power densities as high as 13.1 W cm−2 without needing a high-temperature gradient between the radiator and SSTEC. Additionally, we compare its performance under different radiation spectra, showing the potential for improvement via further optimization of the radiator.
Association between FT4/FT3 ratio and microalbuminuria in euthyroid patients with type 2 diabetes mellitus
In Situ, Treatment with Guanidinium Chloride Ligand Enables Efficient Blue Quantum Dot Light‐Emitting Diodes with 23.5% External Quantum Efficiency
Abstract The poor efficiency and stability of blue Quantum Dot Light‐Emitting diodes (QLED) hinders the practical applications of QLEDs full‐color displays. Excessive electron injection, insufficient hole injection, and abundant defects on the surface of quantum dots (QD) are the main issues limiting the performance of blue devices. Herein, an in situ treatment with bipolar small molecule polydentate ligand–guanidine chloride (GACl) is proposed to simultaneously suppress excessive electron injection, patch surface defects of QDs and enhance hole injection. GACl‐treated blue QLEDs exhibited a remarkable increase in maximal external quantum Efficiency (EQE) from 16.3% to a record 23.5%, accompanied by maximal luminance (36810 cd m −2 ), excellent maximal current efficiency (17.5 cd A −1 ), and enhanced device stability. Combining C–V and J–V characteristics, a concise physical model of hole injection is also established: Below 3 V, hole injection is controlled by the interfacial barrier, primarily through tunneling and thermionic injection; Above 3 V, the interfacial barrier is eliminated, and hole injection efficiency is governed by transport within the QD layer. This study showed a clear physical model for understanding the hole injection mechanism in QLEDs, offering valuable design strategies for improving the performance of blue‐QLEDs.
The competition between van der Waals and ionic interactions at the SrTiO3/mica heterointerface
Growing a 3D film on a 2D substrate, a process often referred to as quasi-van der Waals (vdW) epitaxy, is generally believed to involve both chemical and vdW interactions at the interface. To date, the competition between chemical and vdW interactions at the interface has yet to be established. In this work, we demonstrate that the chemical activity of deposited species is crucial for determining the structure of the 3D/2D heterointerface. During pulsed laser deposition, the chemical activity of SrTiO3 (STO) can be adjusted by controlling the oxygen partial pressure. Therefore, the relative contributions of chemical and vdW interactions at the STO/mica interface can be tuned. This finding ultimately explains the coexistence of [111] and [001] orientations in STO epitaxy on mica.
Lead free perovskite integrated metal organic framework as heterogeneous catalyst for efficient three component click reaction
Electrochemically Driven Optical Dynamics of Reflectin Protein Films
AbstractNeuronally triggered phosphorylation drives the dynamic condensation of reflectin proteins, enabling squid to fine tune the colors reflected from specialized skin cells (iridocytes) for camouflage and communication. Reflectin, the primary component of iridocyte lamellae, forms alternating layers of protein and low refractive index extracellular space within membrane‐encapsulated structures, acting as a biologically tunable distributed Bragg reflector. In vivo, reflectin condensation induces osmotic dehydration of these lamellae, reducing their thickness and shifting the wavelength of reflected light. Inspired by this natural mechanism, we demonstrate that electrochemical reduction of imidazolium moieties within the protein provides a reversible and tunable method to control the water volume fraction in reflectin thin films, allowing precise, dynamic modulation of the film’s refractive index and thickness — mimicking the squid’s dynamic color adaptation. To unravel the underlying mechanisms, we developed electrochemical correlative ellipsometry and surface plasmon resonance spectroscopy, enabling real‐time analysis of optical property changes of reflectin films. This electrochemically driven approach offers unprecedented control over reflectin condensation dynamics. Our findings not only deepen the understanding of biophysical processes governing cephalopod coloration but also pave the way for bio‐inspired materials and devices that seamlessly integrate biological principles with synthetic systems to bridge the biotic‐abiotic gap.